|
Terminal Strips & Boards
Top to bottom: TB10, TB12 and TB14
|
| |
|
|
Turret Terminal Boards
These boards are great for doing point-to-point wiring inside of tube equipment. Three sizes are available. Each board measures 13"
in length and consists of 5 segments (2 1/8" each in length). The board can be cut at each segment for smaller boards if desirable. On the dual row
boards there are a total of 50 Turret style terminals (25 per side and 10 per segment) and each segment has holes drilled at the corners for mounting
standoffs. TB-10 board is 3" in width, TB-12 is 1.5" in width with 50 terminals, and TB-14 is .5" (a single row of terminals, 25 total). The board
material is G10 glass epoxy and the terminals are brass with a solder plating. Terminal- to-Terminal spacing is 3/8" and side-to-side spacing is 2 1/2"
for TB-10 and 1" for TB-12. Terminal height is 1/2 inch. Sold in full boards or individual segments.
Terminal Boards with Standoffs
|
TB10 |
TB10 Full Board $26.00 |
|
|
TB10X |
TB10 One Section $5.50 |
|
|
TB12 |
TB12 Full Board $22.00 |
|
|
TB12X |
TB12 One Section $4.70 |
|
|
TB14 |
TB14 Full Board $12.00 |
|
|
TB14X |
TB14 One Section $2.70 |
|
Standoffs - A set of four 3/8" high standoffs with 8 mounting screws. |
|
STD |
Set of 4 Standoffs $2.50 |
|
|
|
 |
|
Terminal Strip - New
stock not NOS. Two terminal and six terminal versions. Not nearly as good as the turret boards above but good quality none the less if you
are on a budget.
|
STRIP1 |
2 Terminal Strip $0.50 |
|
|
STRIP2 |
6 Terminal Strip $1.20 |
|
|
 |
|
|
Terminal Strip - New
stock not NOS. Four terminal strip with screw connections. An exact fit replacement for Dynaco ST70 MKIII and other speaker terminals.
|
STRIP3 |
4 Terminal Strip ST70 $3.50 |
|
|
|
