HIGH VOLTAGE POWER SUPPLY KITS
|
|
Need a high voltage power supply? Here are a few
ready to go modules to help you with your next project. These kits can provide the building blocks for your
ideas. Of course all of them possess the high quality components and designs you have grown to expect from Welborne
Labs.
|
 |
|
PS3 High Voltage Regulator
Our new PS-3 regulator board is versatile in that it can be used for both vacuum tube power amps and preamplifiers. The PS-3 regulator
board is a low cost solid state voltage regulator circuit that provides very good load and line regulation resulting in a ripple output
that is extremely low.
|
|
|
|
|
|
PS8 Power Supply
High Voltage w/Regulated Filament
The PS-8 is a combination unregulated high voltage and low voltage regulated filament power supply for
vacuum tube preamps. It's available with a laminated or toroid power transformer and a circuit board providing a rectified and filtered
high voltage of 280 to 350Vdc and filament voltages of 6 or 12Vdc.
|
 |
|
|
|
|
PS10 High Voltage Regulated
Power Supply
(no electrolytic capacitors)
A close cousin of our very popular PS3 Voltage Regulator kit, the PS10 is the same
circuit implemented without the use of electrolytic capacitors.... that's right - NO ELECTROLYTICS! The PS10 also includes a solid
state rectification front end making this a complete high voltage power supply.
|
|
|
|
|
|
All designs described and documented on this website are provided solely
for your personal use and may not be used in finished products or resold in any form whatsoever without the written permission of
Welborne Labs.
Welborne Labs reserves the right to periodically make changes and/or enhancements to all products on this website.
|
