Extend the length of any standard 1/4" and 6mm volume control shaft with our shaft extension kit.  The kits (SH1 and SH2) include one coupler, 12" of aluminum extended shaft length, slotted mounting bracket and a 1/4" bushing.   12" shaft can be cut to shorter length.  Slotted bracket allows height adjustment but can also be cut down to size if less height is required

Turret Terminal Boards

These boards are great for doing point-to-point wiring inside of tube equipment. Three sizes are available. Each board measures 13" in length and consists of 5 segments (2 1/8" each in length). The board can be cut at each segment for smaller boards if desirable. On the dual row boards there are a total of 50 Turret style terminals (25 per side and 10 per segment) and each segment has holes drilled at the corners for mounting standoffs. TB-10 board is 3" in width, TB-12 is 1.5" in width with 50 terminals, and TB-14 is .5" (a single row of terminals, 25 total). The board material is G10 glass epoxy and the terminals are brass with a solder plating. Terminal- to-Terminal spacing is 3/8" and side-to-side spacing is 2 1/2" for TB-10 and 1" for TB-12. Terminal height is 1/2 inch. Sold in full boards or individual segments.